Home Latest Log In

PLC-RPT- 12DC 21AU - Relay Module


  • Date:2024-05-22T03:12:34Z
    Price:Negotiation
    Company:上海当临自动化科技有限公司
    Place:China - Shanghai
    Address:上海市青浦区练西公路2850号1幢
    Contact:Jason(Manager)
    Contact Me:
    Tell:+86-19921425125
     Mobile:+86-19921425125
     Email:4515845248348598235511@6q43q.13c3o0m

     Business License verifiedEmail verified

     

    PLC-RPT- 12DC/21AU - Relay Module

    2900317

    PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with Push-in connection and plug-in miniature relay with multi-layer gold contact, for mounting on DIN rail NS 35/7,5, 1 changeover contact, input voltage 12 V DC

    Product type Relay Module
    Product family PLC-INTERFACE
    Application Universal
    Operating mode 100% operating factor
    Mechanical service life 2x 107 cycles

    Maximum power dissipation for nominal condition 0.18 W
    Test voltage (Winding/contact) 4 kV AC (50 Hz, 1 min., winding/contact)
    Insulation characteristics: Coil/contact
    Rated insulation voltage 250 V
    Rated impulse withstand voltage 6 kV
    Overvoltage category III
    Degree of pollution 3

    Coil side
    Nominal input voltage UN 12 V DC
    Input voltage range 9.7 V DC ... 16.8 V DC (20 °C)
    () 12 V DC
    Drive and function monostable
    Drive (polarity) polarized
    Typical input current at UN 15.3 mA
    Typical response time 5 ms
    Typical release time 8 ms
    Protective circuit Reverse polarity protection; Polarity protection diode
    Surge protection; Freewheeling diode
    Operating voltage display Yellow LED

    Switching
    Contact switching type 1 changeover contact
    Type of switch contact Single contact
    Contact material AgSnO, hard gold-plated
    Maximum switching voltage 30 V AC
    36 V DC
    Minimum switching voltage 100 mV (10 mA)
    Limiting continuous current 50 mA
    Maximum inrush current 50 mA
    Min. switching current 1 mA (24 V)
    Short-circuit current 200 A (conditional short-circuit current)
    Interrupting rating (ohmic load) max. 1.2 W (at 24 V DC)
    Output fuse 4 A gL/gG NEOZED
    Switching: when the gold layer is destroyed
    Note the following values are applicable if a gold layer is destroyed
    Maximum switching voltage 250 V AC/DC
    Minimum switching voltage 5 V (at 100 mA)
    Limiting continuous current 6 A
    Min. switching current 10 mA (at 12 V)
    Interrupting rating (ohmic load) max. 140 W (at 24 V DC)
    20 W (at 48 V DC)
    18 W (at 60 V DC)
    23 W (at 110 V DC)
    40 W (at 220 V DC)
    1500 VA (for 250 V AC)
    Switching capacity 2 A (at 24 V, DC13)
    0.2 A (at 110 V, DC13)
    0.1 A (at 220 V, DC13)
    3 A (at 24 V, AC15)
    3 A (at 120 V, AC15)
    3 A (at 230 V, AC15)

    Connection method Push-in connection
    Stripping length 10 mm
    Conductor cross section rigid 0.14 mm² ... 2.5 mm²
    Conductor cross section flexible 0.14 mm² ... 2.5 mm²
    0.2 mm² ... 2.5 mm² (Single ferrule)
    2x 0.5 mm² ... 1 mm² (TWIN ferrule)
    Conductor cross section AWG 26 ... 14

    Width 6.2 mm
    Height 80 mm
    Depth 94 mm

    PLC-RPT- 12DC 21AU - Relay Module

Disclaimer:All information is provided by registered users. You may assess risks based on corresponding qualifications.

Top

PC | Touch

About |Privacy|Misused | Contact | Disclaimer | @2024 ©1688club.com