FL SWITCH 1104N-SFP - Industrial Ethernet Switch
1085173
Narrow Ethernet switch, four RJ45 ports, one SFP port, with 10/100/1000 Mbps on all ports, automatic data transmission speed detection, autocrossing function, and QoS
Width 22.5 mm
Height 117 mm
Depth 84 mm
Utilization restriction
EMC note EMC: class A product, see manufacturer's declaration in the download area
Housing material Polycarbonate fiber reinforced
Mounting type DIN rail mounting
Ethernet (RJ45)
Number of interfaces 4
Connection method RJ45
Note on the connection method Auto negotiation and autocrossing
Transmission speed 10/100/1000 Mbps
Transmission physics Ethernet in RJ45 twisted pair
Transmission length 100 m (per segment)
Signal LEDs Data receive, link status
No. of channels 4 (RJ45 ports)
Ethernet (SFP)
Number of interfaces 1
Connection method SFP
Transmission speed 100/1000 Mbps (full duplex)
Transmission physics Depending on the SFP module
Transmission length up to 40 km (Depending on the fiber/SFP module used)
Signal LEDs Data receive, link status
No. of channels 1 (SFP port)
Product type Switch
Product family Unmanaged Switch 1000
MTTF 77.4 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%)
949.7 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
828.9 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
Switch functions
Basic functions Unmanaged switch
Autonegotiation
Store and Forward switching mode
PROFINET conformance class Conformance-Class A
MAC address table 4k
Status and diagnostic indicators LEDs: US, link and activity per port
Additional functions 100 BASE-TX/100BASE-FX (IEEE 802.3u)
Jumbo frames (Max. 9,216 bytes)
Quality of Service (QoS) prioritization (IEEE 802.1p)
Energy-efficient Ethernet (IEEE 802.3az)
Gigabit Ethernet 1000BASE-T (IEEE 802.3ab)
10Base-T (IEEE 802.3)
Security functions
Basic functions Unmanaged switch
Autonegotiation
Store and Forward switching mode
Maximum power dissipation for nominal condition 3.762 W (at 24 V DC)
Transmission medium Copper
Supply
Supply voltage (DC) 24 V DC
Supply voltage (AC) 24 V AC (50/60 Hz)
Supply voltage range 9 V DC ... 32 V DC
18 V AC ... 30 V AC (50/60 Hz)
Power supply connection Via COMBICON, max. conductor cross section 2.5 mm²
Residual ripple 3.6 VPP (within the permitted voltage range)
Max. current consumption 418 mA (at 9 V DC)
Typical current consumption 48 mA (at 24 V DC)
![FL SWITCH 1104N-SFP - Industrial Ethernet Switch](http://pic.1688club.com/1247/products/s_33020ea36a7a2a750b1802e63246c18d.jpg)