IB IL 24 PWR IN/PS-PAC - Power module
2863135
Inline power terminal, complete with accessories (connection plug and labeling field), 24 V DC, for system voltages UM, US, UL, UANA
The terminal feeds the voltage to an Inline station if there is no bus terminal module, e.g. in the case of ILC 200 UNI. A 24 V DC voltage (U 24 V ) is applied to the terminal. This provides the logics voltage (UL) and the supply voltage for the analog terminals (UANA). The terminal also allows the 24 V DC main voltage (UM) and the 24 V DC segment voltage (US) to be supplied.
Width 48.8 mm
Height 119.8 mm
Depth 71.5 mm
Inline local bus
Number of interfaces 2
Connection method Inline data jumper
Transmission speed 500 kbps / 2 Mbps
Module
ID code (dec.) none
ID code (hex) none
Register length 0 bit
Product type I/O component
Product family Inline
Type modular
Special properties 24 V DC
Supply/boost UM, US, UL, UANA
Insulation characteristics
Protection class III (IEC 61140, EN 61140, VDE 0140-1)
Test section 7.5 V communications power, 24 V analog supply, 24 V bus terminal module supply/functional ground 500 V AC 50 Hz 1 min.
Communications power (UBK, UL, UANA) / I/O (UM, US) 500 V AC 50 Hz 1 min.
24 V main supply, 24 V segment supply/functional ground 500 V AC 50 Hz 1 min.
Supply
I/O voltage range 19.2 V ... 30 V
Residual ripple ±5 %
Max. current consumption 1.25 A DC
Potentials
Power consumption max. 2.55 W (entire device)
Potentials: 24 V supply (U24V) for generating UL and UANA
Supply voltage 24 V DC (via Inline connector)
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw max. 1.25 A DC (at nominal voltage; consisting of: 0.75 A DC for the communications power and 0.5 A DC for the analog voltage supply)
min. 12 mA DC (at nominal voltage)
Potentials: Communications power (UL)
Supply voltage 7.5 V DC (via voltage jumper)
Potentials: Supply of analog modules (UANA)
Supply voltage 24 V DC
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Potentials: Main circuit supply (UM)
Supply voltage 24 V DC (via Inline connector)
Supply voltage range 19.2 V ... 30 V DC (including all tolerances, including ripple)
Potentials: Segment circuit supply (US)
Supply voltage 24 V DC (via Inline connector)
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Connection technology
Connection name Inline connector
Conductor connection
Connection method Spring-cage connection
Conductor cross section rigid 0.08 mm² ... 1.5 mm²
Conductor cross section flexible 0.08 mm² ... 1.5 mm²
Conductor cross section AWG 28 ... 16
Stripping length 8 mm
Inline connector
Connection method Spring-cage connection
Conductor cross section, rigid 0.08 mm² ... 1.5 mm²
Conductor cross section, flexible 0.08 mm² ... 1.5 mm²
Conductor cross section AWG 28 ... 16
Stripping length 8 mm
Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -25 °C ... 55 °C
Ambient temperature (storage/transport) -25 °C ... 85 °C
Permissible humidity (operation) 75 % ... 85 % (in the range of -25°C ... +55°C, appropriate measures against increased humidity (> 85%) must be taken.)
Permissible humidity (storage/transport) 75 % ... 85 % (Slight temporary condensation may sometimes appear on the housing, e.g. when the terminal block is brought out of a vehicle into an enclosed room.)
Mounting type DIN rail mounting
