IB IL 24 DI 32/HD-2MBD-PAC - Digital module
2692885
Inline, Digital input terminal, Digital inputs: 32, 24 V DC, connection technology: 1-conductor, transmission speed in the local bus: 2 Mbps, degree of protection: IP20, including Inline connectors and marking fields
Width 48.8 mm
Height 119.8 mm
Depth 71.5 mm
Note on dimensions Housing dimensions
Utilization restriction
EMC note EMC: class A product, see manufacturer's declaration in the download area
Inline local bus
Number of interfaces 2
Connection method Inline data jumper
Transmission speed 2 Mbps
Module
ID code (dec.) 190
ID code (hex) BE
Length code (hex) 02
Length code (dec) 02
Process data channel 32 bit
Input address area 4 Byte
Output address area 0 Byte
Register length 32 bit
Required parameter data 1 Byte
Required configuration data 4 Byte
Digital:
Input name Digital inputs
Description of the input EN 61131-2 type 1
Number of inputs 32
Connection method Spring-cage connection
Connection technology 1-conductor
Input voltage 24 V DC
Input voltage range "0" signal -3 V DC ... 5 V DC
Input voltage range "1" signal 15 V DC ... 30 V DC
Nominal input voltage UIN 24 V DC
Nominal input current at UIN typ. 2.8 mA
Typical input current per channel 2.8 mA
Typical response time 2 ms
Delay at signal change from 0 to 1 2 ms
Delay at signal change from 1 to 0 4 ms
Protective circuit Short-circuit and overload protection
Product type I/O component
Product family Inline
Type modular
Scope of delivery including Inline connectors and marking fields
No. of channels 32
Operating mode Process data operation with 2 words
Insulation characteristics
Overvoltage category II (IEC 60664-1, EN 60664-1)
Pollution degree 2 (IEC 60664-1, EN 60664-1)
Potentials
Power consumption max. 3.3 W (Module, complete, HW 00)
max. 2.9 W (Module, complete, HW 01 or later)
Potentials: Communications power (UL)
Supply voltage 7.5 V DC (via voltage jumper)
Current draw max. 90 mA (HW 00)
max. 30 mA (from HW 01)
Power consumption max. 0.675 W (HW 00)
max. 0.225 W (from HW 01)
Potentials: Segment circuit supply (US)
Supply voltage 24 V DC (via voltage jumper)
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw max. 50 mA
Electrical isolation/isolation of the voltage ranges
Test voltage: 7.5 V supply (bus logics)/24 V supply (I/O) 500 V AC, 50 Hz, 1 min.
Test voltage: 7.5 V supply (bus logic)/functional ground 500 V AC, 50 Hz, 1 min.
Test voltage: 24 V supply (I/O) / functional ground 500 V AC, 50 Hz, 1 min.
Connection technology
Connection name Inline connector
Conductor connection
Connection method Spring-cage connection
Conductor cross section rigid 0.08 mm² ... 1.5 mm²
Conductor cross section flexible 0.08 mm² ... 1.5 mm²
Conductor cross section AWG 28 ... 16
Stripping length 8 mm
