RIF-2-RSC-LV-230AC/4X21 - Relay Module
2903316
Preassembled relay module with screw connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket. Contact switching type: 4 changeover contacts. Input voltage: 230 V AC
Product type Relay Module
Product family RIFLINE complete
Application Universal
Operating mode 100% operating factor
Mechanical service life approx. 2x 107 cycles
Insulation characteristics
Insulation Basic insulation
Insulation characteristics
Insulation Basic insulation
Overvoltage category II
Pollution degree 2
Maximum power dissipation for nominal condition 1.5 W
Test voltage (Winding/contact) 2.5 kVrms (50 Hz, 1 min., winding/contact)
Test voltage (Contact/contact) 2 kVrms (50 Hz, 1 min., contact/contact)
Rated insulation voltage 250 V AC
Rated surge voltage 2.5 kV
Coil side
Nominal input voltage UN 230 V AC
Input voltage range 184 V AC ... 276 V AC (20 °C)
Input voltage range in reference to UN see diagram
Mains frequency 50/60 Hz
Drive and function monostable
Drive (polarity) polarized
Typical input current at UN 6.5 mA
Typical response time 5 ms ... 15 ms
Typical release time range 5 ms ... 20 ms
Coil voltage 230 V AC
Protective circuit Varistor
Operating voltage display Yellow LED
Switching
Contact switching type 4 changeover contacts
Type of switch contact Single contact
Contact material AgNi
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V (24 mA)
Limiting continuous current 5 A (see diagram)
Maximum inrush current 16 A (20 ms, N/O contacts)
Min. switching current 5 mA (24 V)
Interrupting rating (ohmic load) max. 120 W (24 V DC)
124 W (48 V DC)
108 W (60 V DC)
52 W (110 V DC)
48 W (220 V DC)
1250 VA (250 V AC)
Utilization category CB Scheme (IEC 60947-5-1) AC15, 1 A/240 V (N/O contact)
DC13, 2 A/24 V (N/O contact)
Connection method Screw connection
Stripping length 8 mm
Conductor cross section rigid 0.5 mm² ... 4 mm²
Conductor cross-section rigid (2 conductors with same cross section) 0.5 mm² ... 2.5 mm²
Conductor cross section flexible 0.5 mm² ... 4 mm²
0.5 mm² ... 4 mm² (Ferrule with plastic sleeve)
Conductor cross section flexible (2 conductors with same cross section) 0.5 mm² ... 2.5 mm²
0.5 mm² ... 1.5 mm² (TWIN ferrule with plastic sleeve)
Conductor cross section AWG 20 ... 10 (solid)
20 ... 12 (flexible)
Tightening torque 0.5 Nm ... 0.6 Nm
Width 27 mm
Height 89 mm
Depth 75 mm
Color gray (RAL 7042)
Flammability rating according to UL 94 V2 (Housing)
