PLT-SEC-T3-60-FM-PT - Type 3 surge protection device

2907926

Type 3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage: 60 V AC/DC

Product type Device protection
Product family SEC Family
IEC power supply system TN-S
Type DIN rail module, two-section, divisible
Number of positions 2
Surge protection fault message Optical, remote indicator contact
Insulation characteristics
Overvoltage category III
Pollution degree 2
IEC test classification III
T3
EN type T3
Number of ports One

Indicator/remote signaling
Connection name Remote fault indicator contact
Switching function Changeover contact
Operating voltage 250 V AC
125 V DC (200 mA DC)
Operating current 0.5 A AC
0.5 A DC (75 V DC)

Connection method Push-in connection
Conductor cross section flexible 0.2 mm² ... 2.5 mm²
Conductor cross section rigid 0.2 mm² ... 4 mm²
Conductor cross section AWG 24 ... 12

Dimensional drawing
Width 17.7 mm
Height 101 mm
Depth 74.5 mm (incl. DIN rail 7.5 mm)
Horizontal pitch 1 Div.

Color (Male connector) light grey (RAL 7035)
Color (Base element) gray (RAL 7042)
Flammability rating according to UL 94 V-0
CTI value of material 600
Insulating material PA 6.6-FR 20 % GF
PA 6.6-FR
Housing material PA 6.6-FR 20 % GF
PA 6.6-FR

Mode of protection L-N
L-PE
N-PE
Direction of action 1L-N & N-PE
Nominal voltage UN 60 V AC (TN-S)
Nominal frequency fN 50 Hz (60 Hz)
Maximum continuous voltage UC 80 V AC
Rated load current IL 26 A (at 30 °C)
Residual current IPE ≤ 5 µA
Standby power consumption PC ≤ 5.30 mVA (at UREF)
≤ 8.40 mVA (at UC)
Reference test voltage UREF 66.00 V AC
Nominal discharge current In (8/20) µs 2 kA
Combination wave UOC 4 kV
Voltage protection level Up (L-N) ≤ 0.48 kV
Voltage protection level Up (L-PE) ≤ 0.8 kV
Voltage protection level Up (N-PE) ≤ 0.8 kV
TOV behavior at UT (L-N) 120 V AC (120 min / withstand mode)
TOV behavior at UT (L-PE) 120 V AC (120 min / withstand mode)
Response time tA (L-N) ≤ 25 ns
Response time tA (L-PE) ≤ 100 ns
Response time tA (N-PE) ≤ 100 ns
Short-circuit current rating ISCCR 10 kA AC
Max. backup fuse with branch wiring 32 A (gG / B / C)
Additional technical data
Short-circuit current rating ISCCR 0.25 kA DC (Without additional backup fuse in the DC branch wiring)
5 kA DC (for 20 A gG / B backup fuse)
Maximum discharge current Imax (8/20) µs 4 kA
Residual voltage Ures (L-N) ≤ 0.42 kV (at 1 kA)
≤ 0.48 kV (at 2 kA)
≤ 0.4 kV (at UOC = 2 kV)
Residual voltage Ures (L-PE) ≤ 0.55 kV (at 1 kA)
≤ 0.6 kV (at 2 kA)
≤ 0.6 kV (at UOC = 2 kV)
Residual voltage Ures (N-PE) ≤ 0.55 kV (at 1 kA)
≤ 0.6 kV (at 2 kA)
≤ 0.6 kV (at UOC = 2 kV)
Maximum continuous voltage UC 80 V DC
Mode of protection (DC+) - (DC-)
(DC+/DC-) - PE