SACC-MINMS-5CON-PG13 - Connector
1521371
Connector, Universal, 5-position, Plug straight 7/8"-16UNF, coding: A, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg13,5, external cable diameter 10 mm ... 12 mm, Contact 3 capacitive
Assembly instruction: NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
Assembly instructions The wires can be connected both with ferrules and without ferrules
Product type Circular connector (cable-side)
Sensor type Universal
Number of positions 5
No. of cable outlets 1
Shielded no
Coding A
Pg screw connection Pg13,5
Insulation characteristics
Overvoltage category III
Degree of pollution 3
Dimensional drawing
Length 88 mm
External dimensions
Outside diameter 10 mm ... 12 mm
Housing
Diameter housing 27 mm
Flammability rating according to UL 94 HB
Material of grip body PBT
Contact material CuZn
Contact surface material Au
Contact carrier material PUR/PA 6.6
Material for screw connection Zinc die-cast, nickel-plated
Conductor connection
Connection method Screw connection
Connection cross section 0.34 mm² ... 1.5 mm² (without ferrule)
0.34 mm² ... 1.5 mm² (with ferrule)
0.34 mm² ... 1.5 mm² (solid)
Connection cross section AWG 22 ... 16 (without ferrule)
22 ... 16 (with ferrule)
Stripping length of the individual wire 7 mm
Tightening torque 0.8 Nm (7/8" connectors)
0.4 Nm (Screw terminal blocks)
1 Nm ... 1.4 Nm (Pressure screw)
Rated surge voltage 4 kV
Contact resistance ≤ 5 mΩ
Insulation resistance ≥ 100 MΩ
Nominal voltage UN 300 V AC
300 V DC
Nominal current IN 9 A
Mechanical data
Insertion/withdrawal cycles ≥ 100
Connection 1
Head design Plug
Head cable outlet straight
Head thread type 7/8"-16UNF
Coding A
Signal type/category Universal
Stripping length of the individual wire 7 mm