SMT solder cream mixing equipment/solder paste mixer for pcb assembly line,SMT mixer
smt solder paste mixer Specifications
Working voltage: 220 v AC( 50 hz) 60 w
A rotational speed: 1400 RPM; Secondary rotation: 400 RPM
Ability to work: 500 g * 2 cans
Can accept solder paste pot M tank diameter Φ 60-67 standard Φ
S tank diameter: Φ 53 - Φ 60 (option, please contact the supplier)
L tank diameter :Φ 67 - Φ 74
Every time adjust time setting :0.1 ~ 9.9 minutes, 0.1 minutes;
10 ~ 30 minutes, adjust 1.0 minutes at a time.
Display and warning LED digital display, warning lights flashing and a buzzer
The machine size 410 * 410 * 490 mm (D * W * H)
Model NSTAR - 600
The net weight: 45 kg
smt solder paste mixer Advantage:
Unique contoured shape, generous appearance and practical, which is made by advanced coating process workmanship.
Mixing principle is on the basis of Motor rotation and revolution mode of agitation, no need to defrost the paste. Need to
recovery the paste in short time, then the solder can be used after stirring well and deforming.
Okay for all brands of 500g paste, mixing with 2 cans in one time, which can save time and efficient.
Paste box no need to be opened during stirring to avoid oxidation and water vapor absorption.
Closed stirring can fix running time, make sure stability of paste softness, and by stirring old and new paste can make new active
paste.
Enjoy the high degree of automation, stable performance, easy to operate, high safety factor, and simple in maintenance.
Applies to Omron time relay controller, reliable and easy to operate.
Feature of smt solder paste mixer
1.put the machine on a solid work surface and the connect power. Turn on swith after stabling the machine
2.Open the cover, and put two same weight bottle of solder past or ink into the barrel fixture.
3. Work time setting : the time can be set from 0.1-9.9 min through press the red button on the panel. Generally, it set at 3
minutes or so . If the solder paste is froze to low and stored for too long, the stir time should be increase to appropriate.
4. Press the start switch, the machine starts running when the set time is reached, the machine will automatically stop and
whistle. If there is abnormal noise during operation, you should immediately press stop switch to check. (Note: do not open the
cover before the machine stopping moving to avoid danger
